exit(1);
}
- void*md5 = init_md5();
+ void*md5 = initialize_md5();
int s,t;
gfxpolystroke_t*stroke = current_polygon->strokes;
HEAP_DEFINE(queue,event_t,COMPARE_EVENTS);
HEAP_DEFINE(hqueue,event_t,COMPARE_EVENTS_SIMPLE);
+typedef struct _horizontal {
+ int32_t y;
+ int32_t x1, x2;
+ edgestyle_t*fs;
+ segment_dir_t dir;
+ int polygon_nr;
+} horizontal_t;
+
+typedef struct _horizdata {
+ horizontal_t*data;
+ int num;
+ int size;
+} horizdata_t;
+
typedef struct _status {
int32_t y;
+ double gridsize;
actlist_t*actlist;
queue_t queue;
xrow_t*xrow;
windcontext_t*context;
segment_t*ending_segments;
+ horizdata_t horiz;
+
gfxpolystroke_t*strokes;
#ifdef CHECKS
dict_t*seen_crossings; //list of crossing we saw so far
return edges;
}
-char gfxpoly_check(gfxpoly_t*poly)
+char gfxpoly_check(gfxpoly_t*poly, char updown)
{
- dict_t*d = dict_new2(&point_type);
+ current_polygon = poly;
+ dict_t*d1 = dict_new2(&point_type);
+ dict_t*d2 = dict_new2(&point_type);
int s,t;
gfxpolystroke_t*stroke = poly->strokes;
for(;stroke;stroke=stroke->next) {
+ /* In order to not confuse the fill/wind logic, existing segments must have
+ a non-zero edge style */
+ assert(stroke->fs);
+
+ /* put all the segments into dictionaries so that we can check
+ that the endpoint multiplicity is two */
for(s=0;s<stroke->num_points;s++) {
point_t p = stroke->points[s];
- int num = (s>=1 && s<stroke->num_points-1)?2:1; // mid points are two points (start+end)
- if(!dict_contains(d, &p)) {
- dict_put(d, &p, (void*)(ptroff_t)num);
+ int num_xor = (s>=1 && s<stroke->num_points-1)?2:1; // mid points are two points (start+end)
+ int num_circ = (s>=1 && s<stroke->num_points-1)?0:(s==0?1:-1);
+ if(stroke->dir==DIR_UP)
+ num_circ=-num_circ;
+
+ if(!dict_contains(d1, &p)) {
+ dict_put(d1, &p, (void*)(ptroff_t)num_xor);
+ if(updown) {
+ assert(!dict_contains(d2, &p));
+ dict_put(d2, &p, (void*)(ptroff_t)num_circ);
+ }
} else {
- int count = (ptroff_t)dict_lookup(d, &p);
- dict_del(d, &p);
- count+=num;
- dict_put(d, &p, (void*)(ptroff_t)count);
+ int count = (ptroff_t)dict_lookup(d1, &p);
+ dict_del(d1, &p);
+ count+=num_xor;
+ dict_put(d1, &p, (void*)(ptroff_t)count);
+
+ if(updown) {
+ assert(dict_contains(d2, &p));
+ count = (ptroff_t)dict_lookup(d2, &p);
+ dict_del(d2, &p);
+ count+=num_circ;
+ dict_put(d2, &p, (void*)(ptroff_t)count);
+ }
}
}
}
- DICT_ITERATE_ITEMS(d, point_t*, p, void*, c) {
- int count = (ptroff_t)c;
+ DICT_ITERATE_ITEMS(d1, point_t*, p1, void*, c1) {
+ int count = (ptroff_t)c1;
if(count&1) {
- fprintf(stderr, "Point (%f,%f) occurs %d times\n", p->x*poly->gridsize, p->y*poly->gridsize, count);
- dict_destroy(d);
- return 0;
+ fprintf(stderr, "Error: Point (%.2f,%.2f) occurs %d times\n", p1->x * poly->gridsize, p1->y * poly->gridsize, count);
+ dict_destroy(d1);
+ dict_destroy(d2);
+ return 0;
}
}
- dict_destroy(d);
+ dict_destroy(d1);
+ if(updown) {
+ DICT_ITERATE_ITEMS(d2, point_t*, p2, void*, c2) {
+ int count = (ptroff_t)c2;
+ if(count!=0) {
+ if(count>0) fprintf(stderr, "Error: Point (%d,%d) has %d more incoming than outgoing segments\n", p2->x, p2->y, count);
+ if(count<0) fprintf(stderr, "Error: Point (%d,%d) has %d more outgoing than incoming segments\n", p2->x, p2->y, -count);
+ dict_destroy(d2);
+ return 0;
+ }
+ }
+ }
+ dict_destroy(d2);
return 1;
}
{
int s,t;
double g = poly->gridsize;
- fprintf(stderr, "polyon %08x (gridsize: %f)\n", poly, poly->gridsize);
+ fprintf(stderr, "polyon %p (gridsize: %.2f)\n", poly, poly->gridsize);
gfxpolystroke_t*stroke = poly->strokes;
for(;stroke;stroke=stroke->next) {
- fprintf(stderr, "%08x", stroke);
- for(s=0;s<stroke->num_points-1;s++) {
- point_t a = stroke->points[s];
- point_t b = stroke->points[s+1];
- fprintf(stderr, "%s (%f,%f) -> (%f,%f)%s\n", s?" ":"", a.x*g, a.y*g, b.x*g, b.y*g,
- s==stroke->num_points-2?"]":"");
+ fprintf(stderr, "%11p", stroke);
+ if(stroke->dir==DIR_UP) {
+ for(s=stroke->num_points-1;s>=1;s--) {
+ point_t a = stroke->points[s];
+ point_t b = stroke->points[s-1];
+ fprintf(stderr, "%s (%.2f,%.2f) -> (%.2f,%.2f)%s%s\n", s!=stroke->num_points-1?" ":"", a.x*g, a.y*g, b.x*g, b.y*g,
+ s==1?"]":"", a.y==b.y?"H":"");
+ }
+ } else {
+ for(s=0;s<stroke->num_points-1;s++) {
+ point_t a = stroke->points[s];
+ point_t b = stroke->points[s+1];
+ fprintf(stderr, "%s (%.2f,%.2f) -> (%.2f,%.2f)%s%s\n", s?" ":"", a.x*g, a.y*g, b.x*g, b.y*g,
+ s==stroke->num_points-2?"]":"", a.y==b.y?"H":"");
+ }
}
}
}
fclose(fi);
}
+void gfxpoly_save_arrows(gfxpoly_t*poly, const char*filename)
+{
+ FILE*fi = fopen(filename, "wb");
+ fprintf(fi, "%% gridsize %f\n", poly->gridsize);
+ fprintf(fi, "%% begin\n");
+ int t;
+ double l = 5.0 / poly->gridsize;
+ double g = poly->gridsize;
+ gfxpolystroke_t*stroke = poly->strokes;
+ for(;stroke;stroke=stroke->next) {
+ fprintf(fi, "%g setgray\n", 0);
+
+ int s = stroke->dir==DIR_UP?stroke->num_points-1:0;
+ int end = stroke->dir==DIR_UP?-1:stroke->num_points;
+ int dir = stroke->dir==DIR_UP?-1:1;
+
+ point_t p = stroke->points[s];
+ s+=dir;
+ point_t o = p;
+ fprintf(fi, "%f %f moveto\n", p.x * g, p.y * g);
+ for(;s!=end;s+=dir) {
+ p = stroke->points[s];
+ int lx = p.x - o.x;
+ int ly = p.y - o.y;
+ double d = sqrt(lx*lx+ly*ly);
+ if(!d) d=1;
+ else d = l / d;
+ double d2 = d*1.5;
+ fprintf(fi, "%f %f lineto\n", (p.x - lx*d2) * g, (p.y - ly*d2) * g);
+ fprintf(fi, "%f %f lineto\n", (p.x - lx*d2 + (ly*d))*g,
+ (p.y - ly*d2 - (lx*d))*g);
+ fprintf(fi, "%f %f lineto\n", p.x * g, p.y * g);
+ fprintf(fi, "%f %f lineto\n", (p.x - lx*d2 - (ly*d))*g,
+ (p.y - ly*d2 + (lx*d))*g);
+ fprintf(fi, "%f %f lineto\n", (p.x - lx*d2) * g, (p.y - ly*d2) * g);
+ fprintf(fi, "%f %f moveto\n", p.x * g, p.y * g);
+ o = p;
+ }
+ fprintf(fi, "stroke\n");
+ }
+ fprintf(fi, "showpage\n");
+ fclose(fi);
+}
+
inline static event_t* event_new()
{
event_t*e = rfx_calloc(sizeof(event_t));
free(e);
}
-static void event_dump(event_t*e)
+static void event_dump(status_t*status, event_t*e)
{
if(e->type == EVENT_HORIZONTAL) {
- fprintf(stderr, "Horizontal [%d] (%d,%d) -> (%d,%d)\n", e->s1->nr, e->s1->a.x, e->s1->a.y, e->s1->b.x, e->s1->b.y);
+ fprintf(stderr, "Horizontal [%d] (%.2f,%.2f) -> (%.2f,%.2f)\n", (int)e->s1->nr,
+ e->s1->a.x * status->gridsize, e->s1->a.y * status->gridsize, e->s1->b.x * status->gridsize, e->s1->b.y * status->gridsize);
} else if(e->type == EVENT_START) {
- fprintf(stderr, "event: segment [%d] starts at (%d,%d)\n", e->s1->nr, e->p.x, e->p.y);
+ fprintf(stderr, "event: segment [%d] starts at (%.2f,%.2f)\n", (int)e->s1->nr,
+ e->p.x * status->gridsize, e->p.y * status->gridsize);
} else if(e->type == EVENT_END) {
- fprintf(stderr, "event: segment [%d] ends at (%d,%d)\n", e->s1->nr, e->p.x, e->p.y);
+ fprintf(stderr, "event: segment [%d] ends at (%.2f,%.2f)\n", (int)e->s1->nr,
+ e->p.x * status->gridsize, e->p.y * status->gridsize);
} else if(e->type == EVENT_CROSS) {
- fprintf(stderr, "event: segment [%d] and [%d] intersect at (%d,%d)\n", e->s1->nr, e->s2->nr, e->p.x, e->p.y);
+ fprintf(stderr, "event: segment [%d] and [%d] intersect at (%.2f,%.2f)\n", (int)e->s1->nr, (int)e->s2->nr,
+ e->p.x * status->gridsize, e->p.y * status->gridsize);
} else {
assert(0);
}
}
-static inline max32(int32_t v1, int32_t v2) {return v1>v2?v1:v2;}
-static inline min32(int32_t v1, int32_t v2) {return v1<v2?v1:v2;}
+static inline int32_t max32(int32_t v1, int32_t v2) {return v1>v2?v1:v2;}
+static inline int32_t min32(int32_t v1, int32_t v2) {return v1<v2?v1:v2;}
static void segment_dump(segment_t*s)
{
- fprintf(stderr, "[%d] (%d,%d)->(%d,%d) ", s->nr, s->a.x, s->a.y, s->b.x, s->b.y);
- fprintf(stderr, " dx:%d dy:%d k:%f dx/dy=%f\n", s->delta.x, s->delta.y, s->k,
- (double)s->delta.x / s->delta.y);
+ fprintf(stderr, "[%d] (%d,%d)->(%d,%d) ", (int)s->nr, s->a.x, s->a.y, s->b.x, s->b.y);
+ fprintf(stderr, " dx:%d dy:%d k:%f dx/dy=%f fs=%p\n", s->delta.x, s->delta.y, s->k,
+ (double)s->delta.x / s->delta.y, s->fs);
}
static void segment_init(segment_t*s, int32_t x1, int32_t y1, int32_t x2, int32_t y2, int polygon_nr, segment_dir_t dir)
s->nr = segment_count++;
#ifdef CHECKS
+ /* notice: on some systems (with some compilers), for the line
+ (1073741823,-1073741824)->(1073741823,1073741823)
+ we get LINE_EQ(s->a, s) == 1.
+ That's why we now clamp to 26 bit.
+ */
assert(LINE_EQ(s->a, s) == 0);
assert(LINE_EQ(s->b, s) == 0);
while(pos < stroke->num_points-1) {
assert(stroke->points[pos].y <= stroke->points[pos+1].y);
s = segment_new(stroke->points[pos], stroke->points[pos+1], polygon_nr, stroke->dir);
+ s->fs = stroke->fs;
pos++;
s->stroke = 0;
s->stroke_pos = 0;
#ifdef DEBUG
/*if(l->tmp)
s->nr = l->tmp;*/
- fprintf(stderr, "[%d] (%d,%d) -> (%d,%d) %s (stroke %08x, %d more to come)\n",
+ fprintf(stderr, "[%d] (%d,%d) -> (%d,%d) %s (stroke %p, %d more to come)\n",
s->nr, s->a.x, s->a.y, s->b.x, s->b.y,
s->dir==DIR_UP?"up":"down", stroke, stroke->num_points - 1 - pos);
#endif
return box;
}
+static void store_horizontal(status_t*status, point_t p1, point_t p2, edgestyle_t*fs, segment_dir_t dir, int polygon_nr);
+
+static void append_stroke(status_t*status, point_t a, point_t b, segment_dir_t dir, edgestyle_t*fs)
+{
+ gfxpolystroke_t*stroke = status->strokes;
+ /* find a stoke to attach this segment to. It has to have an endpoint
+ matching our start point, and a matching edgestyle */
+ while(stroke) {
+ point_t p = stroke->points[stroke->num_points-1];
+ if(p.x == a.x && p.y == a.y && stroke->fs == fs && stroke->dir == dir)
+ break;
+ stroke = stroke->next;
+ }
+ if(!stroke) {
+ stroke = rfx_calloc(sizeof(gfxpolystroke_t));
+ stroke->dir = dir;
+ stroke->fs = fs;
+ stroke->next = status->strokes;
+ status->strokes = stroke;
+ stroke->points_size = 2;
+ stroke->points = rfx_calloc(sizeof(point_t)*stroke->points_size);
+ stroke->points[0] = a;
+ stroke->num_points = 1;
+ } else if(stroke->num_points == stroke->points_size) {
+ assert(stroke->fs);
+ stroke->points_size *= 2;
+ stroke->points = rfx_realloc(stroke->points, sizeof(point_t)*stroke->points_size);
+ }
+ stroke->points[stroke->num_points++] = b;
+}
+
static void insert_point_into_segment(status_t*status, segment_t*s, point_t p)
{
assert(s->pos.x != p.x || s->pos.y != p.y);
assert(s->fs_out_ok);
#endif
- if(s->fs_out) {
+ if(s->pos.y != p.y) {
+ /* non horizontal line- copy to output */
+ if(s->fs_out) {
#ifdef DEBUG
- fprintf(stderr, "[%d] receives next point (%d,%d)->(%d,%d) (drawing)\n", s->nr,
- s->pos.x, s->pos.y, p.x, p.y);
-#endif
- /* XXX we probably will never output circular/anticircular polygons, but if
- we do, we would need to set the segment direction here */
- fillstyle_t*fs = s->fs_out;
-
- // omit horizontal lines
- if(s->pos.y != p.y) {
- point_t a = s->pos;
- point_t b = p;
- assert(a.y != b.y);
-
- gfxpolystroke_t*stroke = status->strokes;
- while(stroke) {
- point_t p = stroke->points[stroke->num_points-1];
- if(p.x == a.x && p.y == a.y && stroke->fs == fs)
- break;
- stroke = stroke->next;
- }
- if(!stroke) {
- stroke = rfx_calloc(sizeof(gfxpolystroke_t));
- stroke->dir = DIR_DOWN;
- stroke->fs = fs;
- stroke->next = status->strokes;
- status->strokes = stroke;
- stroke->points_size = 2;
- stroke->points = rfx_calloc(sizeof(point_t)*stroke->points_size);
- stroke->points[0] = a;
- stroke->num_points = 1;
- } else if(stroke->num_points == stroke->points_size) {
- stroke->points_size *= 2;
- stroke->points = rfx_realloc(stroke->points, sizeof(point_t)*stroke->points_size);
- }
- stroke->points[stroke->num_points++] = b;
- }
- } else {
+ fprintf(stderr, "[%d] receives next point (%d,%d)->(%d,%d) (drawing)\n", s->nr,
+ s->pos.x, s->pos.y, p.x, p.y);
+#endif
+ segment_dir_t dir = s->wind.is_filled?DIR_DOWN:DIR_UP;
+ assert(s->pos.y != p.y);
+ append_stroke(status, s->pos, p, dir, s->fs_out);
+ } else {
#ifdef DEBUG
- fprintf(stderr, "[%d] receives next point (%d,%d) (omitting)\n", s->nr, p.x, p.y);
+ fprintf(stderr, "[%d] receives next point (%d,%d) (omitting)\n", s->nr, p.x, p.y);
#endif
+ }
+ } else {
+ /* horizontal line. we need to look at this more closely at the end of this
+ scanline */
+ store_horizontal(status, s->pos, p, s->fs, s->dir, s->polygon_nr);
}
+
s->pos = p;
}
s = range->segmin;
#endif
#ifdef CHECKS
- /* test sanity: check that we don't have changed segments
+ /* test sanity: verify that we don't have changed segments
outside of the given range */
s = actlist_leftmost(status->actlist);
while(s && s!=range->segmin) {
s = s->left;
}
/* in check mode, go through the whole interval so we can test
- that all polygons where the fillstyle changed also have seg->changed=1 */
+ that all polygons where the edgestyle changed also have seg->changed=1 */
s = actlist_leftmost(status->actlist);
end = 0;
#endif
segment_t* left = actlist_left(status->actlist, s);
windstate_t wind = left?left->wind:status->windrule->start(status->context);
s->wind = status->windrule->add(status->context, wind, s->fs, s->dir, s->polygon_nr);
- fillstyle_t*fs_old = s->fs_out;
+ edgestyle_t*fs_old = s->fs_out;
s->fs_out = status->windrule->diff(&wind, &s->wind);
#ifdef DEBUG
/* not strictly necessary, also done by the event */
xrow_add(status->xrow, h->a.x);
- point_t o = h->a;
if(!right) {
assert(!left);
right = right->right; //first seg to the right of h->b
segment_t* s = left;
+ point_t o = h->a;
while(s!=right) {
assert(s);
int32_t x = XPOS_INT(s, status->y);
+ point_t p = {x, status->y};
+ store_horizontal(status, o, p, h->fs, h->dir, h->polygon_nr);
#ifdef DEBUG
- fprintf(stderr, "...into [%d] (%d,%d) -> (%d,%d) at (%d,%d)\n", s->nr,
- s->a.x, s->a.y,
- s->b.x, s->b.y,
- x, status->y
+ fprintf(stderr, "...intersecting with [%d] (%.2f,%.2f) -> (%.2f,%.2f) at (%.2f,%.2f)\n",
+ s->nr,
+ s->a.x * status->gridsize, s->a.y * status->gridsize,
+ s->b.x * status->gridsize, s->b.y * status->gridsize,
+ x * status->gridsize, status->y * status->gridsize
);
#endif
assert(x >= h->a.x);
assert(s->delta.x > 0 && x <= s->b.x || s->delta.x <= 0 && x >= s->b.x);
xrow_add(status->xrow, x);
+ o = p;
s = s->right;
}
}
+/* while, for a scanline, we need both starting as well as ending segments in order
+ to *reconstruct* horizontal lines, we only need one or the other to *process*
+ horizontal lines from the input data.
+
+ So horizontal lines are processed twice: first they create hotpixels by intersecting
+ all segments on the scanline (EVENT_HORIZTONAL). Secondly, they are processed for
+ their actual content. The second also happens for all segments that received more than
+ one point in this scanline.
+*/
+void horiz_reset(horizdata_t*horiz)
+{
+ horiz->num = 0;
+}
+
+void horiz_destroy(horizdata_t*horiz)
+{
+ if(horiz->data) rfx_free(horiz->data);
+ horiz->data = 0;
+}
+
+static int compare_horizontals(const void *_h1, const void *_h2)
+{
+ horizontal_t*h1 = (horizontal_t*)_h1;
+ horizontal_t*h2 = (horizontal_t*)_h2;
+ return h1->x1 - h2->x1;
+}
+
+static void process_horizontals(status_t*status)
+{
+ horizdata_t*horiz = &status->horiz;
+ qsort(horiz->data, horiz->num, sizeof(horizontal_t), compare_horizontals);
+ int t;
+ for(t=0;t<horiz->num;t++) {
+ horizontal_t*h = &horiz->data[t];
+#ifdef DEBUG
+ fprintf(stderr, "horizontal (y=%.2f): %.2f -> %.2f dir=%s fs=%p\n",
+ h->y * status->gridsize,
+ h->x1 * status->gridsize,
+ h->x2 * status->gridsize,
+ h->dir==DIR_UP?"up":"down", h->fs);
+#endif
+ assert(h->y == status->y);
+ assert(xrow_contains(status->xrow, h->x1));
+ assert(xrow_contains(status->xrow, h->x2));
+
+ point_t p1 = {h->x1,h->y};
+ point_t p2 = {h->x2,h->y};
+ segment_t* left = actlist_find(status->actlist, p1, p2);
+ assert(!left || left->fs_out_ok);
+#ifdef DEBUG
+ if(left) {
+ fprintf(stderr, " segment [%d] (%.2f,%.2f -> %.2f,%2f, at %.2f,%.2f) is to the left\n",
+ SEGNR(left),
+ left->a.x * status->gridsize,
+ left->a.y * status->gridsize,
+ left->b.x * status->gridsize,
+ left->b.y * status->gridsize,
+ left->pos.x * status->gridsize,
+ left->pos.y * status->gridsize
+ );
+ /* this segment might be a distance away from the left point
+ of the horizontal line if the horizontal line belongs to a stroke
+ with segments that just ended (so this horizontal line appears to
+ be "floating in space" from our current point of view)
+ assert(left->pos.y == h->y && left->pos.x == h->x1);
+ */
+ }
+#endif
+ windstate_t below = left?left->wind:status->windrule->start(status->context);
+ windstate_t above = status->windrule->add(status->context, below, h->fs, DIR_INVERT(h->dir), h->polygon_nr);
+ edgestyle_t*fs = status->windrule->diff(&above, &below);
+ if(fs) {
+#ifdef DEBUG
+ fprintf(stderr, " ...storing\n");
+#endif
+ append_stroke(status, p1, p2, h->dir, fs);
+ } else {
+#ifdef DEBUG
+ fprintf(stderr, " ...ignoring\n");
+#endif
+ }
+ }
+}
+
+static void store_horizontal(status_t*status, point_t p1, point_t p2, edgestyle_t*fs, segment_dir_t dir, int polygon_nr)
+{
+ assert(p1.y == p2.y);
+ assert(p1.x != p2.x); // TODO: can this happen?
+
+ if(p1.x > p2.x) {
+ dir = DIR_INVERT(dir);
+ point_t p_1 = p1;
+ point_t p_2 = p2;
+ p1 = p_2;
+ p2 = p_1;
+ }
+
+ if(status->horiz.size == status->horiz.num) {
+ if(!status->horiz.size)
+ status->horiz.size = 16;
+ status->horiz.size *= 2;
+ status->horiz.data = rfx_realloc(status->horiz.data, sizeof(status->horiz.data[0])*status->horiz.size);
+ }
+ horizontal_t*h = &status->horiz.data[status->horiz.num++];
+ h->y = p1.y;
+ h->x1 = p1.x;
+ h->x2 = p2.x;
+ h->fs = fs;
+ h->dir = dir;
+ h->polygon_nr = polygon_nr;
+}
+
+
static void event_apply(status_t*status, event_t*e)
{
+#ifdef DEBUG
+ event_dump(status, e);
+#endif
+
switch(e->type) {
case EVENT_HORIZONTAL: {
segment_t*s = e->s1;
-#ifdef DEBUG
- event_dump(e);
-#endif
intersect_with_horizontal(status, s);
advance_stroke(&status->queue, 0, s->stroke, s->polygon_nr, s->stroke_pos);
segment_destroy(s);e->s1=0;
case EVENT_END: {
//delete segment from list
segment_t*s = e->s1;
-#ifdef DEBUG
- event_dump(e);
-#endif
#ifdef CHECKS
dict_del(status->intersecting_segs, s);
dict_del(status->segs_with_point, s);
}
case EVENT_START: {
//insert segment into list
-#ifdef DEBUG
- event_dump(e);
-#endif
segment_t*s = e->s1;
assert(e->p.x == s->a.x && e->p.y == s->a.y);
actlist_insert(status->actlist, s->a, s->b, s);
}
case EVENT_CROSS: {
// exchange two segments
-#ifdef DEBUG
- event_dump(e);
-#endif
if(e->s1->right == e->s2) {
assert(e->s2->left == e->s1);
exchange_two(status, e);
s->pos.y != s->b.y) &&
!dict_contains(status->segs_with_point, s)) {
fprintf(stderr, "Error: segment [%d] (%sslope) intersects in scanline %d, but it didn't receive a point\n",
- s->nr,
+ SEGNR(s),
s->delta.x<0?"-":"+",
status->y);
assert(0);
while(e) {
int32_t y = e->p.y;
int32_t x = 0;
- char fill = 0;
#ifdef DEBUG
- fprintf(stderr, "HORIZONTALS ----------------------------------- %d\n", y);
- actlist_dump(actlist, y-1);
+ fprintf(stderr, "HORIZONTALS ----------------------------------- %f\n", y);
+ actlist_dump(actlist, y-1, 1.0);
#endif
#ifdef CHECKS
actlist_verify(actlist, y-1);
#endif
+ edgestyle_t*fill = 0;
+ int wind = 0;
+
do {
+ assert(e->s1->fs);
if(fill && x != e->p.x) {
-#ifdef DEBUG
- fprintf(stderr, "%d) draw horizontal line from %d to %d\n", y, x, e->p.x);
-#endif
+ assert(abs(wind)==1);
assert(x<e->p.x);
gfxpolystroke_t*stroke = rfx_calloc(sizeof(gfxpolystroke_t));
stroke->num_points = 2;
stroke->points = malloc(sizeof(point_t)*2);
- stroke->dir = DIR_UP; // FIXME
- stroke->fs = 0;
+
+ if(wind>0) {
+ stroke->dir = DIR_DOWN;
+ } else {
+ stroke->dir = DIR_UP;
+ }
+#ifdef DEBUG
+ fprintf(stderr, "%d) draw horizontal line from %d to %d (dir=%s)\n", y, x, e->p.x, stroke->dir==DIR_UP?"up":"down");
+#endif
+
+ stroke->fs = fill;
point_t a,b;
a.y = b.y = y;
- /* we draw from low x to high x so that left/right fillstyles add up
- (because the horizontal line's fill style controls the area *below* the line)
- */
- a.x = e->p.x;
- b.x = x;
+ a.x = x;
+ b.x = e->p.x;
stroke->points[0] = a;
stroke->points[1] = b;
#ifdef CHECKS
/* the output should always be intersection free polygons, so check this horizontal
- line isn't hacking through any segments in the active list */
- segment_t* start = actlist_find(actlist, b, b);
- segment_t* s = actlist_find(actlist, a, a);
+ line isn't puncturing any segments in the active list */
+ segment_t* start = actlist_find(actlist, a, a);
+ segment_t* s = actlist_find(actlist, b, b);
while(s!=start) {
assert(s->a.y == y || s->b.y == y);
s = s->left;
}
#endif
}
+
+ segment_t*s = e->s1;
+
segment_t*left = 0;
- segment_t*s = e->s1;
-
switch(e->type) {
case EVENT_START: {
assert(e->p.x == s->a.x && e->p.y == s->a.y);
e->s2 = 0;
hqueue_put(&hqueue, e);
left = actlist_left(actlist, s);
+ wind += e->s1->dir==DIR_DOWN?-1:1;
break;
}
case EVENT_END: {
left = actlist_left(actlist, s);
actlist_delete(actlist, s);
advance_stroke(0, &hqueue, s->stroke, s->polygon_nr, s->stroke_pos);
+ wind += e->s1->dir==DIR_DOWN?1:-1;
break;
}
default: assert(0);
}
x = e->p.x;
- fill ^= 1;//(before.is_filled != after.is_filled);
+
+ fill = fill?0:&edgestyle_default;
+#if 0
+ if(windrule==&windrule_evenodd) {
+ if(!!fill != !!fill2) {
+ segment_dump(s);
+ event_dump(e);
+ printf("at y=%d x=%d (hline:%p)\n", e->p.y, x, old_fill);
+ if(e->type==EVENT_END) {
+ printf(" %9p\n", s->fs);
+ printf(" |\n");
+ }
+ printf(" %3d %c%2d \n", before1.is_filled, e->type==EVENT_END?'|':' ', after1.is_filled);
+ printf("%12p -----+----- %p\n", old_fill, fill2);
+ printf(" %3d %c%2d \n", before2.is_filled, e->type==EVENT_START?'|':' ', after2.is_filled);
+ if(e->type==EVENT_START) {
+ printf(" |\n");
+ printf(" %9p\n", s->fs);
+ }
+ }
+ assert(!!fill == !!fill2);
+ }
+#endif
+
#ifdef DEBUG
- fprintf(stderr, "%d) event=%s[%d] left:[%d] x:%d\n",
+ fprintf(stderr, "%d) event=%s[%d] left:[%d] x:%d dir:%s\n",
y, e->type==EVENT_START?"start":"end",
s->nr,
left?left->nr:-1,
- x);
+ x, s->dir==DIR_UP?"up":"down");
#endif
if(e->type == EVENT_END)
} while(e && y == e->p.y);
#ifdef CHECKS
- char bleeding = fill;
+ edgestyle_t*bleeding = fill;
assert(!bleeding);
+ segment_t*s = actlist_leftmost(actlist);
+ int dir = 0;
+ while(s) {
+ dir += s->dir==DIR_UP?-1:1;
+ s = actlist_right(actlist, s);
+ }
+ assert(!dir);
#endif
}
status_t status;
memset(&status, 0, sizeof(status_t));
+ status.gridsize = poly1->gridsize;
+
queue_init(&status.queue);
gfxpoly_enqueue(poly1, &status.queue, 0, /*polygon nr*/0);
if(poly2) {
event_t*e = queue_get(&status.queue);
while(e) {
+ assert(e->s1->fs);
status.y = e->p.y;
#ifdef CHECKS
assert(status.y>=lasty);
#endif
#ifdef DEBUG
- fprintf(stderr, "----------------------------------- %d\n", status.y);
- actlist_dump(status.actlist, status.y-1);
+ fprintf(stderr, "----------------------------------- %.2f\n", status.y * status.gridsize);
+ actlist_dump(status.actlist, status.y-1, status.gridsize);
#endif
#ifdef CHECKS
actlist_verify(status.actlist, status.y-1);
#endif
xrow_reset(status.xrow);
+ horiz_reset(&status.horiz);
+
do {
xrow_add(status.xrow, e->p.x);
event_apply(&status, e);
segrange_t range;
memset(&range, 0, sizeof(range));
#ifdef DEBUG
- actlist_dump(status.actlist, status.y);
+ actlist_dump(status.actlist, status.y, status.gridsize);
#endif
add_points_to_positively_sloped_segments(&status, status.y, &range);
add_points_to_negatively_sloped_segments(&status, status.y, &range);
add_points_to_ending_segments(&status, status.y);
recalculate_windings(&status, &range);
+ process_horizontals(&status);
#ifdef CHECKS
check_status(&status);
dict_destroy(status.intersecting_segs);
#endif
actlist_destroy(status.actlist);
queue_destroy(&status.queue);
+ horiz_destroy(&status.horiz);
xrow_destroy(status.xrow);
gfxpoly_t*p = (gfxpoly_t*)malloc(sizeof(gfxpoly_t));
p->gridsize = poly1->gridsize;
p->strokes = status.strokes;
- add_horizontals(p, &windrule_evenodd, context); // output is always even/odd
+#ifdef CHECKS
+ /* we only add segments with non-empty edgestyles to strokes in
+ recalculate_windings, but better safe than sorry */
+ gfxpolystroke_t*stroke = p->strokes;
+ while(stroke) {
+ assert(stroke->fs);
+ stroke = stroke->next;
+ }
+#endif
+
+ //add_horizontals(p, &windrule_evenodd, context); // output is always even/odd
+ //add_horizontals(p, windrule, context);
return p;
}