summary |
shortlog | log |
commit |
commitdiff |
tree
first ⋅ prev ⋅ next
Sami Kerola [Tue, 5 Apr 2011 19:10:46 +0000 (21:10 +0200)]
getdata: increase max number of shared networks
Anders & Thor Eivind reported dhcpd-pools to mess console and
crash at the end of execution. Reason was missing boundary check.
The fix this time is more of less just a increase to max numbers.
That will work ot some extent.
The memory allocations has to be made fully dynamic, but that is
a little bit difficult with the way default.h and parse_config
are working. Basically problem is globals gone crazy & re-entrant
issue with parse function. The true fix to the issue will have to
wait for complete redesign of internals of the command.
Reported-by: Anders LĂ„stad <ala@nextgentel.com>
Reported-by: Thor Eivind Brantzeg <tbr@nextgentel.com>
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Tue, 5 Apr 2011 11:30:50 +0000 (13:30 +0200)]
build-sys: git describe listed wrong tag
The tag v2.14 was probably done without -a option so it was not
recogniced by git describe. To over come this I found easiest to add
--tag to git-version-gen. This change should be reverted after a
release.
Signed-off-by: Sami Kerola <sami.kerola@tomtom.com>
Sami Kerola [Thu, 31 Mar 2011 12:44:42 +0000 (14:44 +0200)]
build-sys: use git version as program version output
The functionality copied is from gnulib.
http://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/git-version-gen;h=
686f7031a6037445bfcb7b43fb4da3c8240d8575;hb=HEAD
Signed-off-by: Sami Kerola <sami.kerola@tomtom.com>
Sami Kerola [Wed, 23 Mar 2011 21:26:57 +0000 (22:26 +0100)]
dhcpd-pools.h: portable program_invocation_short_name
The program_invocation_short_name portability code is copied
from util-linux project almost as is.
Reported-by: Roar Pettersen <rope1968@gmail.com>
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 19 Mar 2011 19:39:01 +0000 (20:39 +0100)]
flose files & free memory when not needed
Fixes to issues found with valgrind.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 19 Mar 2011 11:14:52 +0000 (12:14 +0100)]
autotools: point correct location of src
Fix to error where program src is. Also a bit of clean up and
alignment with autoscan output.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 19 Mar 2011 10:55:47 +0000 (11:55 +0100)]
getdata.c: initialize variables to have safe values
Primarily to get rid of following warning.
getdata.c:63:26: warning: 'macstring' may be used uninitialized in this function
getdata.c:66:20: warning: 'macaddr_p' may be used uninitialized in this function
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 19 Mar 2011 10:52:30 +0000 (11:52 +0100)]
dhcpd-pools.h: indentation fix
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 19 Mar 2011 10:48:48 +0000 (11:48 +0100)]
dhcpd-pools.h: function attributes declarations
Advice compiler about functions to generate better optimization
and argument checks.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Mon, 7 Mar 2011 21:26:32 +0000 (22:26 +0100)]
Release 2.14
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sun, 13 Feb 2011 12:24:06 +0000 (13:24 +0100)]
configure.ac: autoscan updates
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 12 Feb 2011 22:08:45 +0000 (23:08 +0100)]
ignore INSTALL file
I forgot to put the INSTALL file to .gitignore at the time of
commit
fdcfcd12d3fd5a5a62ed7c326c9d7c52c6aefc94
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 12 Feb 2011 22:07:57 +0000 (23:07 +0100)]
fix to safe_strdup prototype.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Tue, 8 Feb 2011 21:52:11 +0000 (22:52 +0100)]
INSTALL file is unnecessary
Also few typos got to be fixed.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Tue, 8 Feb 2011 21:11:49 +0000 (22:11 +0100)]
Allow xml output with leases to use output file
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Tue, 8 Feb 2011 19:33:09 +0000 (20:33 +0100)]
Copyright notice change to GNU license 3
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Tue, 8 Feb 2011 18:52:38 +0000 (19:52 +0100)]
autogen.sh: typo fix in previous commit
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Tue, 8 Feb 2011 18:30:57 +0000 (19:30 +0100)]
autogen.sh: test bug fix & clean up to messages
The test had == used as = which is bashisms, and does not work on
system, such as Ubuntu, where /bin/sh is dash or some other
non-bash shell.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 22 Jan 2011 21:50:14 +0000 (22:50 +0100)]
Do not analyze if sort field selector is rubbish.
Error message also had a bug, it's changed to be over all more
helpful.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 22 Jan 2011 21:05:53 +0000 (22:05 +0100)]
posix_fadvice advice parameter change
With a bit of manual rereading and thinking I came to conclusion
that users will most likely fetch same data over and over again.
Advicing to kernel to keep pages into cache seems to be correct
thing to do.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 22 Jan 2011 20:54:38 +0000 (21:54 +0100)]
Impossible to reach sections removed
With a bit of gcov analysis, and logical thinking, it was obvious
that section that got to be removed cannot be reach.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 22 Jan 2011 20:29:48 +0000 (21:29 +0100)]
Not a syscall error, warn should be warnx.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 22 Jan 2011 19:53:15 +0000 (20:53 +0100)]
Use what libc will provide
The eprintf removed and replaced with err & warn. Option parsing
no longer tries to find missing optargs, which are getopts should
notice. Few complier warnings got to be removed as well. Finally
the commments will no longer exceed standard terminal width.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 22 Jan 2011 17:24:45 +0000 (18:24 +0100)]
Optimization on basis of gcov
Code blocks to more common first order. Also couple checks got to
be refactored next to section where update happens, that will
reduce unnecessary checking.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 22 Jan 2011 12:06:04 +0000 (13:06 +0100)]
The xml output is dirty and marked as FIXME
The xml output does not use output file as all other outputs, it
has sections here and there while everything is supposed to be in
output.c, and finally the unnecessary field analysis loop made
program about 20% slower when xml was not asked.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 22 Jan 2011 11:35:18 +0000 (12:35 +0100)]
Arithmetic comparisons to be same way around
In writing arithmetic comparisons, use "<" and "<=" rather than
">" and ">=". For some justification, read this:
http://thread.gmane.org/gmane.comp.version-control.git/3903/focus=4126
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 22 Jan 2011 11:09:33 +0000 (12:09 +0100)]
Automake 2.64 is needed.
This is due AC_PACKAGE_URL that is used in AC_INIT, see release
announcement for details.
http://lists.gnu.org/archive/html/autoconf/2009-07/msg00079.html
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Sat, 22 Jan 2011 11:06:34 +0000 (12:06 +0100)]
Fix to range dynamic-bootp specifier
Rely on inet_aton return value instead of some unreliable
conversion result after first syscall failed.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 23:14:52 +0000 (00:14 +0100)]
After fopen in ouput ioctl does like /dev/null which cause
ENOTTY, and clean_up will see that without this reset. At least
linux does this, and possibly some other systems. There's a
report from FreeBSD 8.0 which matches quite well with the
symptom.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 22:03:22 +0000 (23:03 +0100)]
Proper .gitignore files
The standard stuff that is needed in ignore files to make git
status etc commands not to freak out after a build.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 21:49:37 +0000 (22:49 +0100)]
Oops adding empty m4 directory did not work.
The m4 has now .gitignore without content. That should work just
fine as a place holder director for automake.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 21:42:43 +0000 (22:42 +0100)]
The automake missed local m4 directory and libtool init.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 21:22:27 +0000 (22:22 +0100)]
README with test data wanted announcement
The file is also reintended to be more like other files.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 21:05:37 +0000 (22:05 +0100)]
README to include quick start.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 19:02:06 +0000 (20:02 +0100)]
ChangeLog obsoleted
See git '(log|show|diff)' for all possible details you would ever
need.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 18:32:18 +0000 (19:32 +0100)]
Rest of the automake file deletions.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 18:25:06 +0000 (19:25 +0100)]
All files that autotools will generate are removed.
Who ever will compile the sources is encouraged to use
./autogen.sh to get ./configure and other necessary files.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 17:51:27 +0000 (18:51 +0100)]
README and THANKS files to support git
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Sami Kerola [Fri, 21 Jan 2011 17:15:50 +0000 (18:15 +0100)]
Import from release candidate 2.13.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>